The Hand Bender is used to configure semi rigid cable up to 0.250 inch (6.35mm) in diameter. Form rollers provide very tight bends without changing the cable impedance. Cable and radius sizes must be specified. Bends with radii from a minimum of 0.195 inch ( 5mm) to a maximum 0.800 inch (20.3mm) for 0.086 inch (2.2mm) cable; and from a minimum of 0.350 inch (8.9mm) to a maximum of 0.750 inch (19mm) for 0.250 (6.35mm) cable are possible. One set of dies is included with the bender.


BASE PRICE: $850.00